新闻中心

Check category



Homepage

Industry news

rolling machine

Precautions for the use of rolling machine

Categories:rolling machine
Author:
Origin:
Time of issue:2021-10-11 08:49
Views:

(Summary description)Rolling machine is a kind of equipment that uses work rolls to bend the sheet metal. It can form parts of different shapes such as cylindrical parts and tapered parts. It is a very important processing equipment. The working principle of the rolling machine is to move the work roll through the action of hydraulic pressure, mechanical force and other external forces, so as to make the plate bend or roll into shape.

Rolling machine

Rolling machine is a kind of equipment that uses work rolls to bend the sheet metal. It can form parts of different shapes such as cylindrical parts and tapered parts. It is a very important processing equipment. The working principle of the rolling machine is to move the work roll through the action of hydraulic pressure, mechanical force and other external forces, so as to make the plate bend or roll into shape.





Precautions for the use of rolling machine

Categories:rolling machine
Author:
Origin:
Time of issue:2021-10-11 08:49
Views:

Information

Rolling machine is a kind of equipment that uses work rolls to bend the sheet metal. It can form parts of different shapes such as cylindrical parts and tapered parts. It is a very important processing equipment. The working principle of the rolling machine is to move the work roll through the action of hydraulic pressure, mechanical force and other external forces, so as to make the plate bend or roll into shape. So do you know what are the precautions for using Rolling machine? Let's take a look at it briefly!
1. Rolling machine needs to be managed by a dedicated person.
2. The operator needs to be familiar with the structure, performance and use of the Rolling machine, and can only operate after the approval of the responsible manager.
3. Check carefully whether the safety device is in good condition before starting the machine.
4. During operation, it is strictly forbidden to put hands and feet on the rollers, transmission parts and workpieces.
5. After work is interrupted, the clutch should be turned to neutral.
6. Multi-person collaborative work requires special command.

7. Overwork is strictly prohibited.
8. The tilting reset of the lifting and turning bearing of the upper roller and the balance of the upper roller must be carried out after the main drive is stopped.
9. It is forbidden to pile up workpieces and sundries in the workplace, so as to keep the machine tool and the site clean at all times.
10. After the operation is completed, the power supply should be cut off and the power supply box should be locked.
The above is a brief introduction to the relevant knowledge about the use of Rolling machine.