Best rolling machine products is a general equipment for rolling metal sheets into cylindrical, arc or other shapes. According to the principle of three-point circle, the relative position change and rotational movement of the workpiece are used to cause continuous plastic deformation of the plate to obtain a workpiece with a predetermined shape. Best rolling machine products can be divided into two types according to the roll position adjustment method: up-regulation and down-regulation. Let's take a look at the operation method of Best rolling machine products!
1. Before operating Best rolling machine products, operators should understand the structure and performance of Best rolling machine products, be familiar with the operation method of the control system and the bending process of the workpiece, and strictly abide by the safety operation items.
2. Before driving and stopping, all buttons of the electronic control system need to be placed in their original positions.
3. During the trial process, the oil supply of each lubrication point should be checked frequently, the dry oil point should be adequately supplied, and the reducer should maintain the specified oil level.
4. During the operation of Best rolling machine products, if irregular noise, impact, or swing are found, stop the machine for maintenance immediately.
5. In the trial project, the transmission mechanism and connection parts should be checked frequently to keep them free of looseness and damage.
6. It is not allowed to roll the steel plate without levelling the weld seam and leveling directly on the machine.
7. When the sheet enters the formal bending roll, it needs to be perpendicular to the center line of the roller.
The above is a brief introduction to the relevant knowledge about the operation method of Best rolling machine products.