For some novices, they don't know how to use the embroidery machine at the beginning, and if they are used improperly, the machine will be damaged. The following editor of 1.7meters garments quilting embroidery machine (double width) will introduce how to use it!
1. First, the pattern is determined, and after selecting the pattern to be embroidered, we must use the embroidery software to make an embroidery version.
2. When processing or modifying the embroidery pattern, you need to know the order of embroidery. Check the embroidery sequence of the pattern design in the pattern design "run" by stitch, section, function or object. You can also check the embroidery sequence by slowly redisplaying it on the screen. DG/ML can simulate the embroidery process. During "embroidery", the stitches will gradually change from black to the configured embroidery thread color.
3. In the actual operation of Quilting Embroidery Machine, it must be done strictly according to the operation requirements. Generally every new machine comes with an operating manual.

1. According to the manufacturing requirements, install the colored thread and the bottom thread, and adjust the tension of the bottom thread.
2. Lay paper flaps and clamp at both ends with clamps. Then spread the gauze, clamp the gauze around the platen with the cloth clip, and clamp the gauze.
3. Turn on the position and set various embroidery parameters.
4. Paste double-sided adhesive tape on the gauze, spread the cut piece on the opening position, so that the embroidered part of the cut piece is completely overlapped with the opening position, press the piece with both hands to make the piece fit tightly On the gauze, prevent the pieces from stretching out.
5. When placing the pieces, the lathe should distinguish the top and bottom, the front and back of the pieces, and recognize the positioning line of each item.
6. Toggle the linkage switch to the right to start the machine, and the computer Quilting Embroidery Machine will start embroidering. Toggle the linkage switch to the left to stop the machine.
7. In the embroidering process, if there are missing stitches, skipped stitches, or stranded threads, rewind the stitches and keep the pieces clean.
8. When the embroidery is finished, the operator should take back the pieces and place them according to the regulations.
The above is the 1.7meters garments quilting embroidery machine (double width) editor describing the relevant operating procedures of the Quilting Embroidery Machine, I hope I can help you.