The computerized embroidery machine is a kind of design that can design the pattern in advance, and then input the data into the machine, and the machine can automatically embroider the pattern you set. Let's follow the editor of Digital control quilting and embroidery machine to see how to use it!
1. Enter the data into the machine, adjust the approximate starting position, and go empty first to determine whether the position setting is appropriate. If appropriate, go back to the original point directly, exit the idling, and click "Direct Embroidery" to start.
2. After the machine is running, it is necessary to re-wind the empty lock core below in time to prepare it for a while. After connecting two or three lock cylinders without thread, you can suspend the machine and replace all the lock cylinders at the embroidered position. Then re-wind the changed lock core and repeat the process.

3. The most important thing to pay attention to in this job is disconnection. The place where the machine is a bit smarter is that the light will be turned on in a short time, and the machine will automatically stop. Then after you re-thread the thread, push the lever and the machine will naturally continue to run.
4. Also pay attention to whether the colored lines on the top are about to run out. If it is nearly used up, connect it from the source, then pull out the new thread and re-pierce it. If you don’t notice that the thread runs out, you need to perforate and hang the thread a little bit, which is very troublesome and can’t make mistakes. If the winding is wrong, the machine will often stop automatically.
5. The splint is also very tiring. Need to lay a layer of backing paper on the frame and fix it. Then spread the cloth and fix it. This is done at the same time as the input data. However, the data is only input once, and this must be fixed again after the embroidering of the pattern in the frame.
6. Wipe thread oil once a day and oil twice a day to help the machine run better, so that it is not easy to break the thread and can improve work efficiency.
The above is the introduction of the editor of Digital control quilting and embroidery machine: how to use the computerized embroidery machine.