

Dongguan Chishing Machinery Co.,Ltd.
Tel:86-769-83322330 Fax:86-769-83322330 E-mail:sales@quiltingmachine.cn
新闻中心
1.7meters garments quilting embroidery machine (double width) tells: How to clean up Quilting Embroidery Machine?
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-03-30 11:51
- Views:
(Summary description)Cleaning the feed dog: remove the screw between the needle plate and the feed dog, remove the cloth lint and dust, and add a small amount of engine oil.
1.7meters garments quilting embroidery machine (double width) tells: How to clean up Quilting Embroidery Machine?
(Summary description)Cleaning the feed dog: remove the screw between the needle plate and the feed dog, remove the cloth lint and dust, and add a small amount of engine oil.
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-03-30 11:51
- Views:
Do you know the cleaning method of Quilting Embroidery Machine? Let’s take a look at it with the editor of 1.7meters garments quilting embroidery machine (double width)!
1. Cleaning method
1. Cleaning the feed dog: remove the screw between the needle plate and the feed dog, remove the cloth lint and dust, and add a small amount of engine oil.
2. Cleaning of the shuttle bed: The shuttle bed is the core of the machine's work, and it is also a place that is prone to failure. Therefore, it is necessary to frequently remove dirt and add a small amount of oil.
3. Cleaning of other parts: The surface and all parts of the panel should be cleaned frequently and kept clean.
2. Lubrication method
1. Lubricating parts: each oil hole on the machine head, lubricating the upper shaft and the parts connected to the upper shaft; the parts in the panel and the movable parts connected to each part; lubricating the presser foot bar and the needle bar and the parts connected to it; the machine board Wipe the movable part of the lower part and add less oil.
2. Matters needing attention in maintenance: After the work is completed, insert the needle into the needle hole plate, raise the presser foot, and cover the machine head with a machine cover to prevent dust intrusion; when starting work, check the main parts first. How is the pedaling condition, whether there is a special sound, whether the needle is normal, etc., if any abnormality is found, it should be overhauled in time; after the machine has been used for a long time, an overhaul should be carried out. If a worn part is found, it should be replaced with a new one. of.
Three, add oil and lubricate
Need to use special oil. If it is used continuously for one day or a few days, the oil should be added once. If the oil is added between uses, the machine should be left idling for one revolution, so that the oil is fully soaked and the excess oil is thrown out, and then the head of the machine should be covered with a clean soft cloth. Wipe clean with the countertop to avoid soiling the sewing material. Then thread on the rags and use the movement of the sewing thread to wipe off the excess oil stains until there are no oil stains on the rags before proceeding to the formal sewing.
The above is the introduction of the editor of 1.7meters garments quilting embroidery machine (double width): I hope you can learn more about the cleaning knowledge of Quilting Embroidery Machine.
Scan the QR code to read on your phone

Dongguan Chishing Machinery Co., Ltd.
PanLing Industrial District, LiaoBu Town, Dongguan, Guangdong , China

Skype:rubycai2008

cfm154229913

What app:+86 13809649595

QQ:849821207
Copyright © Dongguan Chishing Machinery Co., Ltd. 粤ICP备05037810号 Powered by www.300.cn